The Innokin Endura Prism Coils have a resistance of 1.5 ohms and include Japanese organic cotton. Thanks to the “No-Spill Coil Swap System”, they can be replaced in a matter of seconds and without a hassle. To change the burnt out coils, open the base, remove the old coil and replace it with the new one. Close the base and the tank is ready for vaping again.
- Replacement coils for the Innokin Endura Prism (Endura T18 and Endura T22)
- Resistance = 1.5ohms
Extend the life of your clearomizer by replacing only the coil! It’s easy to do, just unscrew the top cap, then the tube then unscrews the coil and replace it with a fresh one. Then put the tube back on followed by filling, put the tip back on and lay it on it’s side for a few minutes before using. Simple and quick.
What Is An Electronic Cigarette Atomizer Coil?
An atomizer coil also known as a replacement coil is the part of an electronic cigarette that heats the e-liquid, which ultimately produces the vapour from the electronic cigarette.
Once the electronic cigarette battery is activated, it heats up the coil, which then causes the e-liquid to be absorbed into the wick which then produces the vapour when you start vaping.
How Long An Atomizer Coil Lasts?
There are several factors that determine the lifespan of your atomizer coil. Firstly being the PG/VG in the e-liquid itself, but also the duration you vape and the power you run your electronic cigarette battery at.
The more power you are running your electronic cigarette battery at, the quicker the coil will burn out. The Higher the wattage and voltage will cause the wire to lose its heating capability, and it will, therefore, produce less vapour.
Additionally, those who vape consistently throughout the day, and don’t allow the coil to cool down for a short period of time after their last vape, will need to change their atomizer coils much more frequently than those who vape less frequently throughout the day.
How Do You Know Your Coil Is Burning Out?
There are several signs indicating that your coil is burning out. The first thing you will experience is reduced vapour production but also maybe a slight difference in taste. Other signs include leaking, maybe a gurgling noise, or poor flavour production.
The most common indications of a burning out coil is a rather strange burnt taste. Although this may not be the coil burning out, but could be many other factors that include running the coil at a power that’s not suitable, or insufficient e-liquid in the tank itself. The material within the atomizer which is usually cotton or silica wick may visually begin to change colour. When this occurs, the material loses its ability to adequately absorb the e-liquid.
How Often Should I Replace My Coils?
It’s very difficult to gauge how frequently you should change your coil, as there are many factors that can determine the lifespan of the coil, which has been explained above.
At FreshMist, we have put together a very general guideline to help evaluate when the correct time is to replace your coil.
- For a very heavy vaper, and maybe vape throughout the day in fairly constant intervals, you will generally need to replace your coil every 5 – 7 days.
- For a moderate vaper, where you may only take a couple drags each time, your coils could last up to 14 days.
- For a very light vaper, who may only vape a few times throughout the day, a coil could last you up to 3 weeks.